3com 800ix-SMP Manuel D’Utilisation
Projector
Power light
Power light
Projector
Service light
Service light
ECP light
Ready light
Projected
image
image
Touch and
pen control
pen control
Status and related
troubleshooting
troubleshooting
Solid amber
Flashing red
N/A
N/A
None
N/A
There’s an issue with the projector
lamp.
lamp.
Off
Flashing red
Solid amber
Off
None
None
The projector’s operating temperature
has been exceeded.
has been exceeded.
Off
Solid red
N/A
N/A
None
N/A
There’s an issue with the projector’s
fan or color wheel.
fan or color wheel.
Off
Off
Off
Off
None
None
The projector power cable isn’t
properly connected.
properly connected.
OR
There’s an issue with the mains
power supply (for example, the circuit
breaker is off).
power supply (for example, the circuit
breaker is off).
Resolving interactive whiteboard issues
This section includes information on resolving issues with your interactive whiteboard.
For information not covered in this section, see the SMART Board 800 series interactive whiteboard
user’s guide (
).
Resolving operation issues
To resolve operation issues, complete the following tasks:
l
Confirm that the camera system cable is connected to the back of the pen tray.
l
Perform the calibration procedure documented in the SMART Board 800 series interactive
whiteboard user’s guide (
).
l
If necessary, complete additional troubleshooting with the guidance of SMART Support using
SMART Board Diagnostics.
Resolving connection issues
To resolve connection issues, complete the following tasks:
l
Confirm that the ECP cable harness’s 4-pin mini-DIN connector is properly connected to the
5V 2A connector on the projector.
C H A P T E R 6
Troubleshooting your interactive whiteboard system
47