Sony MZ-R909 Manuel D’Utilisation
32
Recording a track into an
existing group
existing group
1
While the recorder is stopped, press
GROUP for 2 seconds or more.
GROUP for 2 seconds or more.
2
Press GROUP slightly.
“
“
” flashes in the display and you
can select a group directly (group
skip mode) (page 44).
skip mode) (page 44).
3
Within 5 seconds, press . or >
repeatedly until the group you want
the track to belong to appears.
repeatedly until the group you want
the track to belong to appears.
4
Press and slide REC to the right.
5
Play the source sound.
Notes
• Even if “REC-Posi” is set to “From Here”,
newly recorded tracks are inserted after the
existing tracks in the specified group without
recording over the current contents.
existing tracks in the specified group without
recording over the current contents.
• The group skip mode turns off automatically
z
To add a track that is playing to a group, stop
playing the track first, and then do the
procedure from step 4.
playing the track first, and then do the
procedure from step 4.
To start/stop recording
in sync with the source
player
(Synchro-recording)
in sync with the source
player
(Synchro-recording)
You can easily make digital recordings of
a digital source on an MD.
Before synchro-recording, make
connections to the digital source with a
digital cable, and insert a recordable MD.
a digital source on an MD.
Before synchro-recording, make
connections to the digital source with a
digital cable, and insert a recordable MD.
1
While the recorder is stopped, press
the jog dial, turn the dial until “SYNC
REC” flashes in the display, and then
press the dial again.
the jog dial, turn the dial until “SYNC
REC” flashes in the display, and then
press the dial again.
2
Turn the jog dial until “SYNC ON”
flashes in the display, and then press
the dial.
flashes in the display, and then press
the dial.
CD players,
etc.
etc.
x
REC
Jog dial
007
30:03
Synchro-recording indication