Panasonic C213 Manuel D’Utilisation

43

 Chapter 2    More Menus Features

z

The 2-Sided original cannot be copied into a booklet.

z

Originals should be placed on the ADF. (5.5" x 8.5" or 8.5" x 11" size is only available, up to 40 originals)

z

Saddle stitch binding is possible only when the optional 1-Bin Saddle Finisher (DA-FS356) is installed.
Ledger (11" x 17") and Letter-R (8.5" x 11") are the only applicable paper sizes.

z

The standard setting for the copy size is the reduced size, however, the setting can be changed to a “original 
size”. Refer to Copier Settings in the Operating Instructions (For Function Parameters) on the provided CD-
ROM.

z

When the Fold Position is not matched with center position of the copies, set the binding margin. Refer to 
General Settings (For Key Operator) in the Operating Instructions (For Function Parameters) on the provided 
CD-ROM.

z

Stamping can be combined with the Booklet For Copying with Stamping, refer to Copying with Stamping (see 
pages 61 to 69).

Select “2-Sided / Original->Copy”, 
and then select “Booklet”.

z

To display this screen, refer to steps 1 to 3 of 
Basic Operation for the 2-Sided Copy 
Mode (see page 40).

Select a bind position.

Select the cover page type if 
necessary.

1 Select “Cover”.

Select when binding the left 
side, or the top side of the 
page.

Select when binding the 
right side, or the bottom 
side of the page.

Continue on the next page...