Panasonic C213 Manuel D’Utilisation
44
Chapter 2 More Menus Features
2 Select a cover type.
z
When “Blank” is selected as the cover type,
up to 36 originals can be placed on the ADF.
up to 36 originals can be placed on the ADF.
3 Select “Cover” to select a paper.
z
When changing paper other than the cover,
select the Copy key on the Control Panel. If
the paper of desired size is available on the
tray, the display changes.
Select a paper size from the display.
select the Copy key on the Control Panel. If
the paper of desired size is available on the
tray, the display changes.
Select a paper size from the display.
4
Select “OK” to exit the cover settings.
5
Select “OK”.
z
For the following procedure, refer to steps 5
to 6 of Basic Operation for the 2-Sided
Copy Mode (see page 40).
to 6 of Basic Operation for the 2-Sided
Copy Mode (see page 40).
z
When the Fold Position does not match with
the center position of the copies, set the
binding margin. Refer to General Settings
in the Operating Instructions (For Function
Parameters) on the provided CD-ROM.
the center position of the copies, set the
binding margin. Refer to General Settings
in the Operating Instructions (For Function
Parameters) on the provided CD-ROM.
z
The stapled copies are delivered to the
saddle tray of the 1-bin saddle finisher as
shown below:
saddle tray of the 1-bin saddle finisher as
shown below:
Blank
Not copied on the cover.
Copy
Copied on the cover.
Staple position
Saddle tray