Metrologic Instruments IS3480 Manuel D’Utilisation
25
S
CANNER
O
PERATION
IR Activation Range*
QuantumE’s default power save mode
†
is Laser OFF. This power save mode
turns the laser off after a configured period of non-use. Any movement detected
by the IR in the activation area will cause the scanner to exit power save mode.
The laser will automatically turn back on preparing the scanner for bar code
recognition, decoding and transmission.
by the IR in the activation area will cause the scanner to exit power save mode.
The laser will automatically turn back on preparing the scanner for bar code
recognition, decoding and transmission.
Normal
Figure 13. Normal IR Activation Range
Reduced
Figure 14. Reduced IR Activation Range
* All specifications are subject to change without notice.
†
Refer to the MetroSelect Configuration Guide (00-02407) for additional information on
configurable power save modes.
configurable power save modes.