Q-Logic 16HA Manuel D’Utilisation

Chassis Dimensions: .......................... Refer to 

.

Enclosure Types: ................................The chassis is shipped with four rubber feet 

on the bottom for secure stacking. Cabinet 
Mounting Brackets are also shipped with the 
chassis. You may mount these brackets on the 
front or back of the chassis for mounting in a 
Standard 19-inch EIA rack with either the 
chassis back or front facing the front of the 
equipment rack.

Chassis Support: ................................The chassis MUST be supported by a shelf 

or rails when rack-mounted

Chassis Weight: ..................................32 lbs maximum configuration

Power source loading: ........................1.7 Amps maximum at 90 to 137 Vac

0.9 Amps maximum at 180 to 265 Vac

Each Power Supply: ...........................140 Watts

Operating voltage:..............................90 to 137 Vac; 47 to 63 Hz

180 to 265 Vac; 47 to 63 Hz

Input  Fuse  Type:.................................There  is  one  input  fuse.  The                                                              

fuse is a 4 Amp Slow-Blow, 250V
Littelfuse P/N 218004 or equivalent

Operational Temperature:...................5 to 40°C 

Operating Humidity: ..........................15 to 80%, non-condensing

Operating Altitude:.............................0 to 3048m (0 to 10,000 feet)

Operating Vibration: ..........................During/after (in any axis) of magnitude:

5-500 Hz, random,
0.21 G rms, 10 minutes

Operating Shock: ...............................During/after (in any axis) of magnitude:

4g, 11 ms, 20 repetitions

Air flow: .............................................Cooling air flows from the front to the back.
Heat output:........................................600 BTU/hr fully populated

Non-Operational Temperature: ..........-40 to +70°C

Non-Operating Humidity:..................5 to 90%, non-condensing