Q-Logic 8C Manuel D’Utilisation
B – Command Line Interface
Set Port Command
B-36
59042-01 A
Set Port Command
Sets port state and speed for the specified port temporarily until the next switch
reset or new configuration activation. This command also clears port counters.
reset or new configuration activation. This command also clears port counters.
Authority
Admin
Syntax
set port [port_number]
bypass [alpa]
clear
enable [alpa]
speed [transmission_speed]
state [state]
clear
enable [alpa]
speed [transmission_speed]
state [state]
Keywords
[port_number]
Specifies the port. Ports are numbered beginning with 0.
Specifies the port. Ports are numbered beginning with 0.
bypass [alpa]
Sends a Loop Port Bypass (LPB) to a specific Arbitrated Loop Physical Address
(ALPA) or to all ALPAs on the arbitrated loop. [alpa] can be a specific ALPA or the
keyword ALL to choose all ALPAs.
Sends a Loop Port Bypass (LPB) to a specific Arbitrated Loop Physical Address
(ALPA) or to all ALPAs on the arbitrated loop. [alpa] can be a specific ALPA or the
keyword ALL to choose all ALPAs.
clear
Clears the counters on the specified port.
Clears the counters on the specified port.
enable [alpa]
Sends a Loop Port Enable (LPE) to all ALPAs on the arbitrated loop. [alpa] can be
a specific ALPA or the keyword ALL to choose all ALPAs.
Sends a Loop Port Enable (LPE) to all ALPAs on the arbitrated loop. [alpa] can be
a specific ALPA or the keyword ALL to choose all ALPAs.
speed [transmission_speed]
Specifies the transmission speed. Choose one of the following port speed values:
Specifies the transmission speed. Choose one of the following port speed values:
1Gb/s
One gigabit per second.
One gigabit per second.
2Gb/s
Two gigabits per second.
Two gigabits per second.
Auto
The port speed is automatically detected.
The port speed is automatically detected.
state [state]
Specifies the administrative state. Choose one of the following port state values:
Specifies the administrative state. Choose one of the following port state values:
Online
Places the port online.
Places the port online.
Offline
Places the port offline.
Places the port offline.
Diagnostics
Prepares the port for testing.
Prepares the port for testing.
Down
Disables the port.
Disables the port.