Q-Logic 2-8C Manuel D’Utilisation

B – Command Line Interface

Show Log Command

59042-06 A

B-75

0

The following is an example of the Show Log Options command:

SANbox2 #> show log options

  Allowed options for log

  -----------------------

  component  All, None, NameServer, MgmtServer, Zoning, Switch, Chassis, Blade,

              Port, Eport, Snmp, Other

  level       Critical,Warn,Info,None

The following is an example of the Show Log command:

  SANbox2 #> show log

   [327][day month date time year][I][Eport Port:0/8][Eport State=

   E_A0_GET_DOMAIN_ID]

   [328][day month date time year][I][Eport Port: 0/8][FSPF PortUp state=0]

   [329][day month date time year][I][Eport Port: 0/8][Sending init hello]

   [330][day month date time year][I][Eport Port: 0/8][Processing EFP, oxid= 0x8]

   [331][day month date time year][I][Eport Port: 0/8][Eport State = E_A2_IDLE]

   [332][day month date time year][I][Eport Port: 0/8][EFP,WWN= 0x100000c0dd00b845,

   len= 0x30]

   [333][day month date time year][I][Eport Port: 0/8][Sending LSU oxid=0xc:type=1]

   [334][day month date time year][I][Eport Port: 0/8][Send Zone Merge Request]

   [335][day month date time year][I][Eport Port: 0/8][LSDB Xchg timer set]

   [336][day month date time year][I][Eport Port: 0/8][Setting attribute

   Oper.UserPort.0.8.EpConnState Connected]