Q-Logic 2-8C Manuel D’Utilisation

B – Command Line Interface
Zone Command

B-90

59042-06 A

0

Manages zones and zone membership on a switch.

Admin session and a Zoning Edit session. Refer to the 

 for information about starting a Zoning Edit session. The List, 

Members, and Zonesets keywords are available without an Admin session.

add [zone] [member_list]
copy [zone_source] [zone_destination]
create [zone]
delete [zone]
list
members [zone]
remove [zone] [member_list]
rename [zone_old [zone_new]
type [zone] [zone_type]
zonesets [zone]

add [zone] [member_list]
Specifies one or more ports/devices given by [members] to add to the zone 
named [zone]. Use a <space> to delimit aliases and ports/devices in 
[member_list]. A zone can have a maximum of 2000 members. [member_list] can 
have any of the following formats:
„

Domain ID and port number pair (Domain ID, Port Number). Domain IDs can 
be 1–-239; port numbers can be 0–-255.

„

6-character hexadecimal device Fibre Channel address (hex)

„

16-character hexadecimal worldwide port name (WWPN) with the format 
xx:xx:xx:xx:xx:xx:xx:xx.

„

Alias name

The application verifies that the [members] format is correct, but does not validate 
that such a member exists.
copy [zone_source] [zone_destination]
Creates a new zone named [zone_destination] and copies the membership into it 
from the zone given by [zone_source].
create [zone]
Creates a zone with the name given by [zone]. An zone name must begin with a 
letter and be no longer than 64 characters. Valid characters are 0-9, A-Z, a-z, _, $, 
^, and -. The zoning database supports a maximum of 1000 zones.
delete [zone]
Deletes the specified zone given by [zone] from the zoning database. If the zone 
is a component of the active zone set, the zone will not be removed from the 
active zone set until the active zone set is deactivated.