Q-Logic 2-8C Manuel D’Utilisation
4 – Installation
Installing a Switch
59042-06 A
4-7
0
d.
Enter the following COM Port settings in the COM Properties
window and choose the OK button.
window and choose the OK button.
Bits per second: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
For Linux:
a.
a.
Set up minicom to use the serial port. Create or modify the
/etc/minirc.dfl file with the following content:
/etc/minirc.dfl file with the following content:
pr portdev/ttyS0
pu minit
pu mreset
pu mhangup
pr portdev/ttyS0
specifies port 0 on the workstation.
Choose "pr" setting to match the workstation port to which you
connected the switch.
connected the switch.
b.
Verify that all users have permission to run minicom. Review the
/etc/minicom.users file and confirm that the line "ALL" exists or
that there are specific user entries.
/etc/minicom.users file and confirm that the line "ALL" exists or
that there are specific user entries.
For Solaris: Modify the /etc/remote file to include the following lines.
/dev/term/a refers to serial port a. Choose the "dv" setting to match the
workstation port to which you connected to the switch.
/dev/term/a refers to serial port a. Choose the "dv" setting to match the
workstation port to which you connected to the switch.
SANbox2:
\:dv=/dev/term/a:br#9600:el=^C^S^Q^U^D:ie=%$:oe=^D:
3.