Q-Logic MKII-BASE16 Manuel D’Utilisation

Page de 138
GigWorks MkII-16 Switch Model MKII-BASE16
Installer's/User's Manual            59003-01 Rev. A
Switch Management
3-1
Section 3  
Switch Management
Introduction 
The Switch supports management through:  
the Windows NT™ or Windows 95™-based GigWorks MKII Switch
Utilities,
a Trivial File Transfer Protocol (TFTP) server, and 
a built-in SNMP Agent. 
Optionally, the GigWorks MKII Switch Web-Based Management Interface
application is also available. This management interface is a Web-based (Java)
application.  
The Switch Utilities require an Ethernet connection to each managed chassis. The Web-
based Switch management application can manage multiple fabrics and can
manage multi-chassis fabrics through an Ethernet connection to any one chassis
in the fabric. Contact your Ancor sales representative or sales engineer for
information about the Web-based Switch management application.
GigWorks MKII Switch Utilities
The GigWorks MKII Switch Utilities allows you to:
Set up the connection between the Ethernet port on a PC and the Ethernet port on
the Switch and track the communication that takes place over this connection
Configure the Switch Management  interface with its IP network configuration
parameters and SNMP configuration parameters
Configure the Fabric Number and Chassis Number
Configure the Chassis Stage Type for multistage fabrics
Cross-Connect or
Input-Output/Transfer (IOT)
Configure the Fibre Channel Timeouts
RATOV
EDTOV
Configure the desired Chassis State and read the actual Chassis State
On Line
Off Line
Test