Q-Logic 5802V Manuel D’Utilisation

9 – Device Security Configuration

Managing Groups

59263-01  A

9-13

A

Adding a member to a group involves specifying a group, the member worldwide 
name, and the member attributes. The member attributes define the 
authentication method, encryption method, secrets, and fabric binding, depending 
on the group type.

„

For ISL member attributes, refer to 

„

For Port member attributes, refer to 

„

For MS member attributes, refer to 

Enter the 

 Add command to add a member to a group:

SANbox #> admin start

SANbox (admin) #> security edit

SANbox (admin-security) #> group add Group_1

  A list of attributes with formatting and default values will follow

  Enter a new value or simply press the ENTER key to accept the current value

  with exception of the Group Member WWN field which is mandatory.

  If you wish to terminate this process before reaching the end of the list

  press 'q' or 'Q' and the ENTER key to do so.

  Group Name       Group_1

  Group Type       ISL

  Member          (WWN)                            [00:00:00:00:00:00:00:00] 10:00:00:c0:dd:00:90:a3

  Authentication  (None / Chap)                    [None                   ] chap

  PrimaryHash     (MD5 / SHA-1)                    [MD5                    ]

  PrimarySecret   (32 hex or 16 ASCII char value)  [                       ] 0123456789abcdef

  SecondaryHash   (MD5 / SHA-1 / None)             [None                   ]

  SecondarySecret (40 hex or 20 ASCII char value)  [                       ]

  Binding         (domain ID 1-239, 0=None)        [0                      ]

  Finished configuring attributes.

  To discard this configuration use the security cancel command.