Q-Logic 5802V Manuel D’Utilisation

9 – Device Security Configuration

Managing Groups

9-14

59263-01  A

S

Modifying a group member involves changing the member attributes. The 
member attributes define the authentication method, encryption methods, secrets, 
and fabric binding, depending on the group type.

„

For ISL member attributes, refer to 

„

For Port member attributes, refer to 

„

For MS member attributes, refer to 

Enter the 

 Edit command to change the attributes of a group member:

SANbox #> admin start

SANbox (admin) #> security edit

SANbox (admin-security) #> group edit G1 10:00:00:c0:dd:00:90:a3

  A list of attributes with formatting and current values will follow.

  Enter a new value or simply press the ENTER key to accept the current value.

  If you wish to terminate this process before reaching the end of the list

  press 'q' or 'Q' and the ENTER key to do so.

  Group Name        g1

  Group Type        ISL

  Group Member      10:00:00:c0:dd:00:90:a3

  Authentication    (None / Chap)                   [None]  chap

  PrimaryHash       (MD5 / SHA-1)                   [MD5 ]  sha-1

  PrimarySecret     (40 hex or 20 ASCII char value) [    ]  12345678901234567890

  SecondaryHash     (MD5 / SHA-1 / None)            [None]  md5

  SecondarySecret   (32 hex or 16 ASCII char value) [    ]  1234567890123456

  Binding           (domain ID 1-239, 0=None)       [3   ]

  Finished configuring attributes.

  To discard this configuration use the security cancel command.

Enter the 

 Remove command to remove a member from a group as shown 

in the following example:

SANbox (admin-security) #> group remove group_1 10:00:00:c0:dd:00:90:a3