Q-Logic 5802V Manuel D’Utilisation

11 – Event Log Configuration

Starting and Stopping Event Logging

11-2

59263-01  A

S

Enter the 

 Stop command in an Admin session to stop recording event 

messages in the switch Log as shown in the following example:

SANbox (admin) #> set log stop

Enter the Set Log Start command to start recording event message in the switch 
log as shown in the following example:

SANbox (admin) #> set log start

Enter the 

 command to display the event log. Each message has the 

following format:

[ordinal][time_stamp][severity][message_ID][source][message_text]

 describes the message format components.

[ordinal]

A number assigned to each message in sequence since the last time 
the alarm history was cleared.

[time_stamp]

The time the alarm was issued in the format day month hh:mm:ss.ms 
UTC yyyy. This time stamp comes from the switch for events that 
originate with the switch, and from the workstation for events that 
originate with QuickTools or Enterprise Fabric Suite 2007

[severity]

The event severity: A–Alarm, C–Critical, W–Warning, I–Informative

[message_ID]

A number that identifies the message using the following format: cat-
egory.message_number

[source]

The program module or application that generated the event. 
Sources include Zoning, Switch, PortApp, EPort, Management 
Server. Alarms do not include the source.

[message_text]

The message text