Q-Logic 5802V Manuel D’Utilisation

11 – Event Log Configuration

Managing the Event Log Configuration

11-4

59263-01  A

S

Enter the 

 Display command in an Admin session to specify the severity 

level filter to use to determine what messages are automatically displayed on the 
screen when they occur. Alarms are always included in the output stream. The 
following example includes warning and critical level messages in the output 
stream:

SANbox (admin) #> set log display warn

Managing the Event Log Configuration consists of the following tasks:

„

„

„

You can customize what events are recorded in the switch event log according to 
component, severity level, and port. Enter the 

Component, Set Log Level, 

and Set Log Port commands in an Admin session to filter the events to be 
recorded. You can choose from the following component events:

„

E_Port events

„

Management server events

„

Name server events

„

Port events

„

Switch management events

„

Simple Network Management Protocol (SNMP) events

„

Zoning events

„

Call Home events

The following example configures the event log to record switch management 
events with warning and critical severity levels associated with ports 0–3. Entering 
the Set Log Save command ensures that this configuration is preserved across 
switch resets.

SANbox (admin) #> set log component switch

SANbox (admin) #> set log level warn

SANbox (admin) #> set log port 0 1 2 3

SANbox (admin) #> set log save