Q-Logic 5802V Manuel D’Utilisation

12 – Call Home Configuration

Managing the Call Home Database

59263-01  A

12-13

A

Enter the 

 Add command to add a data capture configuration to the 

Tech_Support_Center profile as shown in the following example. If the 
Tech_Support_Center profile does not exist, you must create it using the 

Create command.

SANbox #> admin start

SANbox (admin) #> callhome edit

SANbox (admin-callhome) #> capture add

  A list of attributes with formatting and default values will follow.

  Enter a value or simply press the ENTER key to accept the default value.

  If you wish to terminate this process before reaching the end of the list

  press 'q' or 'Q' and the ENTER key to do so.

  Value (press ENTER to accept the default, 'q' to quit):

    TimeOfDay  (HH:MM)                        [02:00]

    DayOfWeek  (Sun,Mon,Tue,Wed,Thu,Fri,Sat)  [Sat  ]

    Interval   (decimal value, 1-26 weeks)    [1    ]

  A capture entry has been added to profile Tech_Support_Center.

  This configuration must be saved with the 'callhome save' command

  before it can take effect, or to discard this configuration

  use the 'callhome cancel' command.