Q-Logic 5802V Manuel D’Utilisation

12 – Call Home Configuration

Testing a Call Home Profile

59263-01  A

12-15

A

Enter the 

 Remove command to delete a data capture configuration from 

the Tech_Support_Center profile as shown in the following example:

SANbox #> admin start

SANbox (admin) #> callhome edit

SANbox (admin-callhome) #> capture remove

Capture Entries for Profile:  Tech_Support_Center

  Index  TimeOfDay  DayOfWeek  Interval

  -----  ---------  ---------  --------

  1      02:00      Sat        1 (weeks)

  Please select a capture entry from the list above ('q' to quit): 1

  The selected capture entry has been removed from profile Tech_Support_Center.

  This configuration must be saved with the 'callhome save' command

  before it can take effect, or to discard this configuration

  use the 'callhome cancel' command.

Enter the 

 Test Profile command to test a Call Home profile as shown in 

the following example. This command generates a test message and routes it to 
the email recipients specified in the profile.

SANbox #> admin start

SANbox (admin) #> callhome test profile group4

  A callhome profile test has been started.

  A notification with the test result will appear

  on the screen when the test has completed.

SANbox (admin) #>

  Test for Callhome Profile group4 Passed.