Q-Logic 5802V Manuel D’Utilisation
12 – Call Home Configuration
Resetting the Call Home Database
59263-01 A
12-17
A
Enter the
Callhome command to clear all Call Home profiles and resets the
Tech_Support_Center profile and Call Home service configuration to the factory
defaults as shown in the following example:
defaults as shown in the following example:
SANbox #> admin start
SANbox (admin) #> reset callhome
The callhome configuration will be reset and the default values activated.
Please confirm (y/n): [n] y
Reset and activation in progress ....