Q-Logic 5802V Manuel D’Utilisation

14 – Command Reference

Test Port

59263-01  A

14-195

A

Tests individual ports using an offline or online test.

Admin session

offline [loopback_type]
online

The port to be tested. [port_number] can be 0–23.

Performs an offline test of the type given by [loopback_type] on the port given by 
[port_number]. Use the 

 command to place the port in the diagnostics 

state before running the test. [loopback_type] can have the following values:

Exercises the internal port connections.

Exercises the port and its transceiver. A transceiver with a loopback plug is 
required for the port.

Exercises the port, transceiver, and device connections while the port is online. 
This test does not disrupt communication on the port.

                                                                                           

An internal test on an XPAK port verifies that a complete path exists, 
but does not send a test frame.

An external test on an XPAK port verifies that a complete path exists, 
but does not send a test frame.