Alpha Vision Tech MPS48-7M Manuel D’Utilisation
16
021-511-B4-002, Rev. B
4.0 Installation,
continued
4.3 Enclosure Installation, Steel or Concrete Pole
To mount the MPS48-7M on concrete or steel poles, two user-supplied mounting straps
are required (straps must be stainless, galvanized, or equivalent). Most codes require the
base of the enclosure to be located a minimum height from the ground. Always verify height
restrictions before installation.
are required (straps must be stainless, galvanized, or equivalent). Most codes require the
base of the enclosure to be located a minimum height from the ground. Always verify height
restrictions before installation.
Before installing an enclosure, the location and method of mounting must be approved by the property owner.
ATTENTION:
3. Secure the enclosure to the bracket using the four self-
tapping screws with washers (supplied).
Required Tools and Materials:
•
#2 Phillips screwdriver
•
Two user-supplied pole straps to fi t pole (straps must be
stainless, galvanized or equivalent)
stainless, galvanized or equivalent)
Installation Procedure:
1. Position the bracket at the appropriate height with the tab
facing up. Secure it to the pole using the pole straps.
2. Hang the enclosure on the bracket.
Tab