Lexmark X940e Manuel D’Utilisation
84 Replace black pc unit
The black photoconductor is exhausted. Install a new photoconductor.
84 Replace color pc units
One or more of the color photoconductors are exhausted. Install new cyan, magenta, and yellow photoconductors.
84 Unsupported <color> pc unit
Replace the specified photoconductor(s).
Note: The printer has four photoconductors: cyan, magenta, yellow, and black. The cyan, magenta, and yellow
photoconductors must all be replaced at the same time. The black photoconductor can be replaced separately.
photoconductors must all be replaced at the same time. The black photoconductor can be replaced separately.
88 <color> toner low
When this message appears, the toner is low.
•
When the print becomes faded, replace the toner cartridge.
•
Touch Continue to clear this message and continue printing.
88 Replace <color> toner
The toner cartridge is exhausted. Replace the specified toner cartridge.
200–289.yy paper jam
1
Clear the paper path.
2
Touch Continue to continue printing.
289 Staple error <x>
1
Clear the jam from the specified stapler area(s).
2
Touch Continue to continue printing.
290-295.yy scanner jam
Clear all original documents from the scanner.
900–999 Service <message>
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Check all cable connections.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer back on.
If the service message appears again, contact Customer Support, and report the message.
202