Epson PP-100 Manuel D’Utilisation

Maintaining Your Product

Using the Head Cleaning utility

Follow the steps below to clean the print head using the Head Cleaning utility.

1. Make sure the product is turned on.

2. Make sure that no lights are indicating errors, and that the disc cover is closed.

3. Access the printer driver.

4. Click the Utility tab, then click the Head Cleaning button.

5. Follow the on-screen instructions.

The

power light flashes while the product performs the cleaning cycle.

Caution:
Never turn off the product while the

power light is flashing. Doing so may damage the

product.

Note:
❏ If print quality has not improved after repeating this procedure about four times, turn the product

off and wait for at least six hours. Then run the nozzle check again and repeat the head cleaning
if necessary.

❏ If the print quality still has not improved, at least one of your ink cartridges may be old or

damaged and may need to be replaced.
&

❏ If print quality remains a problem after replacing the ink cartridges, contact your dealer.