Epson PP-100 Manuel D’Utilisation

Follow the steps below to clean the print head using the product buttons.

1. Make sure the product is turned on.

2. Make sure that no lights are indicating errors, and that the disc cover is closed.

3. Press and hold down the 

Cleaning button for three seconds.

The product starts cleaning the print head and the 

 

power light begins flashing.

c

 

4. When the 

 

power light stops flashing, print a nozzle check pattern to confirm that 

the head is clean.
&

Note:
❏ If print quality has not improved after repeating this procedure about four times, turn the product 

❏ If the print quality still has not improved, at least one of your ink cartridges may be old or 

damaged and may need to be replaced.
&

❏ If print quality remains a problem after replacing the ink cartridges, contact your dealer.

If you notice a misalignment of vertical lines or horizontal banding, you may be able to 
solve this problem by using the Print Head Alignment utility in your printer driver. 

Follow the steps below to align the print head using the Print Head Alignment utility.

1. Make sure that an unprinted disc with a 116 mm (4.57") or more outside diameter is 

inserted in Stacker 1.

2. Make sure that no lights are indicating errors, and that the disc cover is closed.