Peerless Industries HDS200 Manuel D’Utilisation

ISSUED: 07-24-12   SHEET #: 180-9023-1

 Peer-to-Peer units can be confi gured to multicast mode using the USB Multicast Set-Up Method or LAN 

Multicast Set-Up Method. Additional Receivers (HDS200-R) are required and sold separately. Please visit 

 for programming instructions.

Multicast Wireless Mode
Multicast Wireless Mode is a pre-confi gured setting that enables the Transmitter to stream AV media from 
one Transmitter to up to four Receivers. All multicast systems come preconfi gured to wirelessly stream to the 
specifi ed number of Receivers. 

Available Multicast Models
Model Capability 

HDS200-2:   HD Flow Pro Wireless Multimedia Kit: streams to two display devices  

Multicast Wireless

HDS200-3: 

HD Flow Pro Wireless Multimedia Kit: streams to three display devices  

Multicast Wireless

HDS200-4: 

HD Flow Pro Wireless Multimedia Kit: streams to four display devices  

Multicast Wireless

Multicast LAN (wired) Mode (Advanced Settings)
Multicast LAN (wired) Mode is an available confi guration for applications where wireless signal transfer is 
not desired, allowed or surpasses wireless distance limitations. This mode allows for the Transmitter to be 
confi gured to an existing LAN to transmit AV signal to multiple Receivers.   Please visit http://www.hdfl ow.com/
Tech-Support 

for step-by-step LAN programming instructions. 

 Additional Receivers (HDS200-R, sold separately) are required when adding on to a peer-to-peer system. 

After the purchase of additional Receiver(s), part number HDS200-R, use the following instructions to add the 
Receiver(s) to the current system.

To set up the HD Flow Pro Multimedia Kit as a multicast system that transmits to 2, 3 or 4 Receivers using the 
USB Multicast Set-Up Method please visit http://www.hdfl ow.com/Tech-Support to view the instructional 
video.

To set up the HD Flow Pro Wireless Multimedia Kit as a multicast system that transmits to 2, 3 or 4 Receivers 
using the LAN Confi guration Method please reference the instruction manual that comes with the HDS200-R or 
visit http://www.hdfl ow.com/Tech-Support to download instructions.

The wired connection mode requires a CAT5e/6 cable to be connected to the LAN ports between the 
Transmitter and Receiver. HD Flow Pro Wireless Multimedia Kit comes standard with enabled wireless 
connection. Setup for LAN operation is required. Please visit http://www.hdfl ow.com/Tech-Support for step-
by-step LAN programming instructions.