Peerless Industries HDS200 Manuale Utente
27 of 36
ISSUED: 07-24-12 SHEET #: 180-9023-1
Note:
Peer-to-Peer units can be confi gured to multicast mode using the USB Multicast Set-Up Method or LAN
Multicast Set-Up Method. Additional Receivers (HDS200-R) are required and sold separately. Please visit
http://www.hdfl ow.com/Tech-Support
for programming instructions.
Multicast Modes
Multicast Wireless Mode
Multicast Wireless Mode is a pre-confi gured setting that enables the Transmitter to stream AV media from
one Transmitter to up to four Receivers. All multicast systems come preconfi gured to wirelessly stream to the
specifi ed number of Receivers.
Multicast Wireless Mode is a pre-confi gured setting that enables the Transmitter to stream AV media from
one Transmitter to up to four Receivers. All multicast systems come preconfi gured to wirelessly stream to the
specifi ed number of Receivers.
Available Multicast Models
Model Capability
Model Capability
Mode
HDS200-2: HD Flow Pro Wireless Multimedia Kit: streams to two display devices
Multicast Wireless
HDS200-3:
HD Flow Pro Wireless Multimedia Kit: streams to three display devices
Multicast Wireless
HDS200-4:
HD Flow Pro Wireless Multimedia Kit: streams to four display devices
Multicast Wireless
Multicast LAN (wired) Mode (Advanced Settings)
Multicast LAN (wired) Mode is an available confi guration for applications where wireless signal transfer is
not desired, allowed or surpasses wireless distance limitations. This mode allows for the Transmitter to be
confi gured to an existing LAN to transmit AV signal to multiple Receivers. Please visit http://www.hdfl ow.com/
Tech-Support
Multicast LAN (wired) Mode is an available confi guration for applications where wireless signal transfer is
not desired, allowed or surpasses wireless distance limitations. This mode allows for the Transmitter to be
confi gured to an existing LAN to transmit AV signal to multiple Receivers. Please visit http://www.hdfl ow.com/
Tech-Support
for step-by-step LAN programming instructions.
Note:
Additional Receivers (HDS200-R, sold separately) are required when adding on to a peer-to-peer system.
Converting a Peer-to-Peer Wireless HD Flow Multimedia Kit to a Multicast Wireless
Multimedia Kit
Multimedia Kit
After the purchase of additional Receiver(s), part number HDS200-R, use the following instructions to add the
Receiver(s) to the current system.
Receiver(s) to the current system.
USB Multicast Set-Up Method
To set up the HD Flow Pro Multimedia Kit as a multicast system that transmits to 2, 3 or 4 Receivers using the
USB Multicast Set-Up Method please visit http://www.hdfl ow.com/Tech-Support to view the instructional
video.
USB Multicast Set-Up Method please visit http://www.hdfl ow.com/Tech-Support to view the instructional
video.
LAN Multicast Set-Up Method (Advanced Settings)
To set up the HD Flow Pro Wireless Multimedia Kit as a multicast system that transmits to 2, 3 or 4 Receivers
using the LAN Confi guration Method please reference the instruction manual that comes with the HDS200-R or
visit http://www.hdfl ow.com/Tech-Support to download instructions.
using the LAN Confi guration Method please reference the instruction manual that comes with the HDS200-R or
visit http://www.hdfl ow.com/Tech-Support to download instructions.
LAN - Wired Connection Mode
The wired connection mode requires a CAT5e/6 cable to be connected to the LAN ports between the
Transmitter and Receiver. HD Flow Pro Wireless Multimedia Kit comes standard with enabled wireless
connection. Setup for LAN operation is required. Please visit http://www.hdfl ow.com/Tech-Support for step-
by-step LAN programming instructions.
Transmitter and Receiver. HD Flow Pro Wireless Multimedia Kit comes standard with enabled wireless
connection. Setup for LAN operation is required. Please visit http://www.hdfl ow.com/Tech-Support for step-
by-step LAN programming instructions.