RAD Data comm Modular Access Device with Integrated Router Manuel D’Utilisation

Chapter 5  Setup Menu 

FCD-IPM Installation and Operation Manual 

5-14 Routing/Bridging 

Menu

 

 

 

STATIC STATIONS AND NETS(MAC, IP, IPX) (Device name - FCD-IPM) 

 

 1. IP - 192.168.182.056 mask-255.255.255.248 interface-2/16   cost-1 

 2. IPX - 25490880       interface-3      cost-1 

 

 A - Add , C - Clear all , D - Delete 

 ESC - Return to previous menu. 

Select this parameter to add, delete, or clear static entries in the IP/IPX Routing 
table or Bridge Routing table. If FCD-IPM is attached to more than one LAN, then 
select this parameter for each LAN interface, if necessary. The Aging Mechanism 
does not remove static entries from the routing tables. 
When adding static entries in the IP/IPX Routing table or Bridge Routing table, they 
can be defined in 4 ways (see 

MAC Station 

MAC Station defines a single static entry in the Bridge routing table. The entry is a single 

MAC Address (6 bytes) entered in hexadecimal format. 

IP Net 

IP Net defines a network as the destination. IP Net consists of 3 parts: 
Destination

 – defined by entering the subnet IP address and IP mask.  

For example, 192.168.182.32 is a subnet IP address and 255.255.255.240 is the IP 

mask.  
Frame pathway

 – specified either as an interface (i.e. port) number or as Next Hop IP 

address. In Next Hop IP the frames are sent to another router; from there they will be 

sent to their final destination (see 

 – used only for advertising via routing protocols.  

The values are 1 to 15.