RAD Data comm Modular Access Device with Integrated Router Manuel D’Utilisation

FCD-IPM Installation and Operation Manual 

Chapter 5  Setup Menu 

 

Routing/Bridging Menu 

5-19 

Low IP Address 

Lower boundary of the IP address range 

High IP Address  Upper boundary of the IP address range 

IP Mask 

IP mask for the IP address range (for DHCP and BOOTP) 

Default 

Gateway 

Default Gateway IP address for workstations which receive IP addresses 

from the range defined by the Low IP Address and High IP Address. 

The Default Gateway IP address must be within this IP address range 
(used by DHCP only). 

Primary DNS 

IP address of the DNS server, which can be used by the workstation 
(for DHCP and IPCP). 

Secondary DNS  Additional DNS server address that is an alternative to the Primary DNS 

(for DHCP and IPCP). 

Interface 

Determines which requests to the IP address can be accepted. You can 

determine the interface by toggling between WAN, LAN (any LAN or 
specifically 2 LAN interface units), and ALL (both WAN and LAN). 

Select this parameter to define the remote access. The PC Remote Access Option 
is important if FCD-IPM is used as a remote access server for remote PCs accessing 

the LAN. Refer to 

 PC Remote Access (Device name - FCD-IPM) 

 

 1. Shared IP net - 192.168.1.1    mask - 255.255.255.240 

 

 ESC - Return to previous menu 

 

 Choose one of the above: 

Shared IP Net 
Select this parameter to enter the Shared IP net address. The Shared IP net address 
is used by all remote workstations that connect to the remote access server on the 
WAN links.