RAD Data comm Modular Access Device with Integrated Router Manuel D’Utilisation
FCD-IPM Installation and Operation Manual
Chapter 5 Setup Menu
WAN Economy Menu
5-85
To configure the operation:
1. From the Filters menu, choose Block and Forwarding.
2. Toggle between Block and Forward.
1. From the Filters menu, choose Block and Forwarding.
2. Toggle between Block and Forward.
To configure the broadcast control:
The broadcast control filter manages special frames, normally not propagated
throughout the network. The frames managed are:
• IP - Local broadcast propagation
• IPX - Zero destination propagation, IPX Type 20 frames propagation
• NETBIOS over IP - IP frames with TCP/UDP ports 137, 138, 139 propagation.
The broadcast control filter manages special frames, normally not propagated
throughout the network. The frames managed are:
• IP - Local broadcast propagation
• IPX - Zero destination propagation, IPX Type 20 frames propagation
• NETBIOS over IP - IP frames with TCP/UDP ports 137, 138, 139 propagation.
From the Filters menu, press 2 to toggle between Full Propagation and Block
Propagation.
Factory default: Block Propagation.
Quick Filters are defined per protocol. Configure each protocol that you want to
block or forward.
Propagation.
Factory default: Block Propagation.
Quick Filters are defined per protocol. Configure each protocol that you want to
block or forward.
To configure the Quick Filter parameters:
1. From the Filters menu, choose Quick Filters.
1. From the Filters menu, choose Quick Filters.
The Quick Filters menu appears (refer to
2. To toggle between Forward/Block, press the number of the protocol that you
want to filter.
QUICK FILTERS (Device name - FCD-IPM)
Choose the protocols you want to block or forward!!:
(The Blocking or forwarding is to interface LAN 1 only)
1. IP NO FILTERS
2. IPX NO FILTERS
3. SNA NO FILTERS
4. NetBIOS NO FILTERS
5. AppleTalk NO FILTERS
6. DECnet NO FILTERS
7. Others NO FILTERS
ESC - Return to previous menu
Choose one of the above:
Figure 5-89. Quick Filters Menu