RAD Data comm Modular Access Device with Integrated Router Manuel D’Utilisation

Chapter 5  Setup Menu 

FCD-IPM Installation and Operation Manual 

5-90 

WAN Economy Menu

 

 

To exit filtering and return to the main Setup menu, press <Esc>. The following 
prompt appears: 'up' (Y/N)? 
Press Y to save changes in the Flash Memory. Press N to cancel your changes. The 
system loads the previous set of masks the next time the system is rebooted. 

Connection On Demand (Device name - FCD-IPM) 

-------------------- 

 

 1. Start Connection 
 2. Terminate Connection 
 3. Minimum Time Between Two Connects 
 4. Minimum Time Between Two Disconnects 
 5. Connect Manually 
 6. Disconnect Manually 

 

 

 

 ESC - Return to previous menu 

 Choose one of the above: 

To save money, you may want to limit the time that a link is kept open. COD 
allows you to determine the traffic conditions that open and close the link. Using 
COD, a line is opened only when traffic conditions fulfill specified conditions. 
When there is no need for a connection, the line is automatically terminated. 
COD is only effective if: 
•  The line is connected to a modem or ISDN (a dialup link) 
•  The link is asynchronous 
•  The connection type is Originate or Answer&Originate.  

If the connection type is Answer only, the line connection is started when the unit 
is turned on in order to receive calls. If the connection type is Originate only or 
Answer&Originate the connection starts when a telephone number is defined.