Manualsbrain.com
  1. Manuels
  2. Marques
  3. RAD Data comm
  4. Modular Access Device with Integrated Router
  5. Manuel D’Utilisation

RAD Data comm Modular Access Device with Integrated Router Manuel D’Utilisation

Télécharger
Page de 224
FCD-IPM Installation and Operation Manual 
Chapter 3  Operation 
 
Operating Instructions 
3-3 
Table 3-1.  Front Panel Indicator Functions (Cont.) 
Object Description 
Function 
LINK1 REM  
SYNC LOSS 
Red LED 
ON when E1 link is in remote sync loss alarm. 
Remote sync loss signal is sent from Remote Unit to 
inform the local unit that a sync loss exists at the remote 
end.  
SUB REM  
SYNC LOSS 
Red LED 
ON when one of the E1 sub link is in remote sync loss 
alarm. 
Remote sync loss signal is sent from Remote Unit to 
inform the sub link of the local unit that a sync loss 
exists at the remote end.  
Rear Panel Indicators 
Table 3-2.  Rear Panel Indicator Functions 
Object Description 
Function 
LINK 
Green LED 
ON – LAN is connected to LAN1 or LAN2 connector or 
to one of the Ethernet/Fast Ethernet switch ports. 
100M 
Green LED 
ON – LAN speed is 100M 
OFF – LAN speed is 10M 
3.3 Operating Instructions 
Turning On 
In order for the unit to function, you must provide FCD-IPM with a setup 
configuration. You configure the unit after the initial power-up stage. 
 
To turn on FCD-IPM: 
•  Set the power switch on the rear panel to ON.  
FCD-IPM performs a self-test. All the FCD-IPM indicators should light up. 
Confirm that all are operating. Following the test, all indicators except PWR 
and READY turn off. 
FCD-IPM is now ready for configuration. Refer to 
Chapter 4
, for quick setup and 
advanced configuration instructions. 
Normal Indications 
During normal operation the POWER indicator lights up, and the READY indicator 
lights up when packets can be transferred. Additional indications are: 
•  The LAN DATA indicator lights when a packet is received or transmitted on 
the LAN side