RAD Data comm Modular Access Device with Integrated Router Manuel D’Utilisation

FCD-IPM Installation and Operation Manual 

Chapter 4  Configuration 

 

Quick Setup Menu 

4-7 

Set this parameter for the WAN configuration. 

Link Status 

 

Transmits and receives frames.  
Does not transmit or receive frames. The link may be permanently disabled, for 

example, when testing. A disabled line freezes all link operation, including 

connection attempts and forwarding. 
If a link is defined as backup to another, then whenever the main link operates 

normally, the backup link is disabled. If the main link fails, the backup link begins 

to operate and become enabled. You must make sure that the routing settings are 
correct so that traffic will be forwarded to the desired destination via the backup 

link. When you restore the main link connection, the backup link becomes 
disabled again. 

 

Link Mode 

Data bits are transmitted at a fixed rate. The sender and the receiver are 
synchronized 
A packet-switching protocol for connecting devices on a WAN. 
Data bits are transmitted at a fixed rate. The sender and the receiver are not 

synchronized. 

Routing 

Assigns the link forwarding type.