MicroNet Technology SP5050 Manuel D’Utilisation

Warning

: Once users execute flash –clean, all the configurations of VoIP

FXO gateway will be cleaned. This can only be executed by user who log in
with root

5.6 [commit] command

Save changes after configuring the VoIP FXO gateway.

usr/config$ commit

This may take a few seconds, please wait....
Commit to flash memory ok!
usr/config$

Note:
Users should use commit to save modified value, or they will not be
activated after system reboot.

5.7 [ifaddr] command

Configure and display VoIP FXO gateway network information.

usr/config$ ifaddr

LAN information and configuration
Usage:
ifaddr [-print]|[-dhcp used]|[-sntp mode [server]]
ifaddr [-ipsharing used [deviceAddr]]
ifaddr [-ip ipaddress] [-mask subnetmask] [-gate defaultgateway]

-print

Display LAN information and configuration.

-ip

Specify VoIP FXO gateway ip address.

-mask

Set Internet subnet mask.

-gate Specify

default

gateway

address

-dhcp

Set DHCP client service flag (On/Off).

-sntp

Set SNTP server mode and specify IP address.

-timezone

Set local timezone.

-cmcenter Set Management Center IP Address.

-ipsharing

Specify usage of an IP sharing device and specify IP

address.
Note:

Range of ip address setting (0.0.0.0 ~ 255.255.255.255).

DHCP client setting value (On=1, Off=0). If DHCP set to 'On',

Obtain a set of Internet configuration from DHCP server assigned.

SNTP mode (0=no update, 1=specify server IP, 2=broadcast mode).

Example:

ifaddr -ip 210.59.163.202 -mask 255.255.255.0 -gate 210.59.163.254

ifaddr

-dhcp

ifaddr -sntp 1 210.59.163.254

ifaddr

-ipsharing

210.59.163.254