Huawei MC509 Manuel D’Utilisation
HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
AT Command Interface Specification
Wakeup Commands
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
128
12
Wakeup Commands
12.1 ^WAKEUPCFG -Wakeup Function Configuration
12.1.1 Command Syntax
Command
Possible response(s)
^WAKEUPCFG=<n>[,
<channel>[,<source>]]
<channel>[,<source>]]
<CR><LF>OK<CR><LF>
Errors about MT:
<CR><LF>+CME ERROR:<err><CR><LF>
^WAKEUPCFG?
<CR><LF>^WAKEUPCFG:
<n>,<channel>,<source><CR><LF><CR><LF>OK<CR>
<LF>
<n>,<channel>,<source><CR><LF><CR><LF>OK<CR>
<LF>
^WAKEUPCFG=?
<CR><LF>^WAKEUPCFG: (list of supported <n>s),(list of
<channel>s),(list of supported <source>s)
<CR><LF><CR><LF>OK<CR><LF>
<channel>s),(list of supported <source>s)
<CR><LF><CR><LF>OK<CR><LF>
12.1.2 Description
This command is used to configure module
‟s wakeup function by host, including the
hardware interfaces supported, and the supported remote-wakeup sources.
12.1.3 Defined Values
<n> The status of wakeup function
0: Turn off the wakeup function;
1 : Turn on the wakeup function (Default);
<channel> Option of hardware interfaces that support wakeup with length of 1 byte.
The supported hardware interfaces are defined with 8-bit mask. Every single bit
represents the status of one kind of hardware interface.
represents the status of one kind of hardware interface.
„1‟ represents TURN ON and
„0‟ represents TURN OFF. Details are defined as following table: