IBM 09-0572-000 Manuel D’Utilisation

This sample procedure describes how to modify the 
PROTOCOL.INI and CONFIG.SYS PC startup files to load the 
NDIS drivers for a PC running LAN Manager.

1 Create a LANMAN subdirectory from the root of your 

boot disk using the following command:

2 Build a PROTOCOL.INI file in the LANMAN subdirectory. 

The protocol manager, PROTMAN.DOS, places the 
PROTOCOL.INI file in the LANMAN subdirectory. The 
PROTOCOL.INI file contains information about the protocol 
manager, NDIS transport protocol, and your network adapter.

The following sample PROTOCOL.INI file uses NetBEUI (2.0) 
as the NDIS transport protocol with 3Com drivers. 

[PROTOCOL MANAGER]
   DRIVERNAME  =  PROTMAN$

[NETBEUI_XIF]
   DRIVERNAME  =  NETBEUI$
   BINDINGS  =  TLNK3_NIF

[TLNK3_NIF]
   DRIVERNAME  =  TLNK3$

3 If you have not already done so, copy the 3Com DOS NDIS 

driver (TLNK3.DOS) into the LANMAN subdirectory. 

The NDIS driver is located in the \NDIS\DOS subdirectory on 
the TokenDisk diskette.

4 Add the following lines to your CONFIG.SYS file (located 

in the root directory of your boot disk):

DEVICE = C:\LANMAN\PROTMAN.DOS/I:C:\LANMAN
DEVICE = C:\LANMAN\TLNK3.DOS
DEVICE = C:\LANMAN\<PROTOCOLDRIVER>.DOS

Substitute the actual DOS PROTOCOL driver name, if 
appropriate, for PROTOCOLDRIVER.DOS.