IBM 09-0572-000 Manuel D’Utilisation
Updating the Current NDIS Driver
5-9
Updating the Current NDIS Driver
If you are updating an existing NDIS driver (rather than
installing one for the first time), follow these steps:
installing one for the first time), follow these steps:
1 From the main menu, select Network Drivers and press
[Enter].
2 Select NDIS Driver Installation and Information.
3 Select Update NDIS Driver and press [Enter].
This option will update your current driver to the latest
version. The NDIS 2.01 drivers are TLNK3.DOS and TLNK3.OS2.
version. The NDIS 2.01 drivers are TLNK3.DOS and TLNK3.OS2.
4 Exit the program and remove the
TokenDisk diskette.
5 Reboot your PC.
This completes the procedure for updating the NDIS 2.01 drivers.
Using IBM Drivers
The 3C619C adapter is fully IBM-compatible. Because of this,
the 3C619C adapter can use the same drivers as IBM 16/4
Token Ring Adapters.
the 3C619C adapter can use the same drivers as IBM 16/4
Token Ring Adapters.
Obtaining IBM Network Drivers
Obtain IBM token ring drivers for the 3C619C adapter in one
of the following ways:
of the following ways:
■
Copy IBM 16/4 Token Ring Adapter drivers supplied with your
network operating system.
network operating system.
■
Use the Remote Program Load (RPL) program to download IBM
drivers from the network. Follow the procedures described in
the next section, “Using Remote Program Load (RPL).”
drivers from the network. Follow the procedures described in
the next section, “Using Remote Program Load (RPL).”
■
Use the IBM 16/4 Token Ring Adapter drivers that accompany
the latest version of IBM’s LAN Support Program.
the latest version of IBM’s LAN Support Program.
With IBM drivers, use only IBM mode settings.