Manualsbrain.com
  1. Manuels
  2. Marques
  3. RAD Data comm
  4. IPmux-11
  5. Manuel D’Utilisation

RAD Data comm IPmux-11 Manuel D’Utilisation

Télécharger
Page de 148
Installation and Operation Manual 
Chapter 6  Troubleshooting and Diagnostics 
IPmux-11 Ver. 2.00 
Testing IPmux-11 
6-21 
Diagnostics>Ping 
1. Destination IP address             ... (0.0.0.0) 
2. VLAN tagging                           (Enable) 
3. VLAN ID[1 - 4095]                  ... (0) 
4. VLAN priority[0 - 7]               ... (0) 
5. Number of frames to send[1 - 4]    ... (1) 
6. Ping send 
 
> 
 
Please select item <1 to 6> 
ESC-prev.menu; !-main menu; &-exit                                   1 Mngr/s 
Figure 6-17.  Ping Menu 
Running a Trace Route 
You can run a trace route to a remote IP host to check the IPmux-11 IP 
connectivity.  
 
To run a trace route to an IP host: 
1.  From the Diagnostics menu (
), select Trace route. 
). 
2.  From the Trace route menu, configure the following: 
 
Destination IP Address (IP address of the host to which you intend to trace 
the route): 0.0.0.0 to 255.255.255.255. 
 
VLAN Tagging: 
 
Enable (VLAN tagging is enabled) 
 
Disable (VLAN tagging is disabled) 
 
VLAN ID: 1–4095 
 
VLAN Priority: 0–7 
 
The VLAN ID and VLAN Priority configuration is available only if the VLAN tagging is 
enabled. 
 
3. Select Trace route send to start the trace route. 
Note