Emerson P/N MMI-20019808 Manuel D’Utilisation
Installation
User Manual
9
2.3
Micro Motion Ethernet Config Tool installation
(optional)
(optional)
If you do not plan to use the Micro Motion Ethernet Config Tool, you do not need to install it.
The Micro Motion Ethernet Config Tool is used for the following tasks:
The Micro Motion Ethernet Config Tool is used for the following tasks:
•
Configuration of some network settings. Depending on your network, you may be able
to use switches for all required settings.
to use switches for all required settings.
•
(Petroleum measurement or concentration measurement application only)
Downloading the alternate web pages and configuration files into the EtherNet/IP
Module.
Downloading the alternate web pages and configuration files into the EtherNet/IP
Module.
IMPORTANT
The configuration files and web pages are tightly coupled. Download files provided by Micro
Motion only if you plan to use the Micro Motion web pages, Do not change any settings or
transactions in the configuration file.
Motion only if you plan to use the Micro Motion web pages, Do not change any settings or
transactions in the configuration file.
2.3.1
System requirements
•
Pentium 133 MHz or higher
•
10 MB of free space
•
8 MB RAM
•
Windows NT v4.0 or higher, Windows 2000, or Windows XP
•
Internet Explorer v4.01 SP1 or higher
2.3.2
Installation steps
1.
Install the software program. Locate and run the EtherNet/IP Module setup program on
the EtherNet/IP Module Resource CD and follow the on-screen instructions.
the EtherNet/IP Module Resource CD and follow the on-screen instructions.