Emerson P/N MMI-20019808 Manuel D’Utilisation
Device Profile
User Manual
31
Reset service
When the Identity Object receives a Reset request, it:
•
Determines if it can provide the type of reset requested
•
Responds to the request
•
Attempts to perform the type of reset requested
B.2.2
Message Router, Class 02h
The Message Router Object provides a messaging connection point through which a Client may
address a service to any object class or instance residing in the physical device.
address a service to any object class or instance residing in the physical device.
B.2.3
Assembly Object, Class 04h
The Assembly Object binds attributes of multiple objects, which allows data to or from each
object to be sent or received over a single connection. Assembly objects can be used to bind
input data or output data. The terms “input” and “output” are defined from the network's point
of view. An input produces data on the network and an output consumes data from the
network.
object to be sent or received over a single connection. Assembly objects can be used to bind
input data or output data. The terms “input” and “output” are defined from the network's point
of view. An input produces data on the network and an output consumes data from the
network.
This object provides access to the I/O Data in the Input and Output Data areas in the
Micro Motion EtherNet/IP Module.
Micro Motion EtherNet/IP Module.
4... 7
Extended Device Status:
Value
Meaning
0000b
Unknown
0010b
Faulted I/O Connection
0011b
No I/O connection established
0100b
Non-volatile configuration bad
0110b
Connection in Run mode
0111b
Connection in Idle mode
(other)
(reserved)
8
Set for minor recoverable faults
9
Set for minor unrecoverable faults
10
Set for major recoverable faults
11
Set for major unrecoverable faults
12... 15
(reserved)