Emerson P/N MMI-20019808 Manuel D’Utilisation
Device Profile
User Manual
33
Instance attributes - Instance/Connection Point 96h
This instance corresponds to I/O Data (Output) in the Micro Motion EtherNet/IP Module. The
EtherNet/IP Module supports two different configurations. Specific input assembly attributes
depend on the configuration in use.
EtherNet/IP Module supports two different configurations. Specific input assembly attributes
depend on the configuration in use.
Note
The default output data size is non-zero. The actual size depends on the configuration in use. If
the I/O output data size is set to 0, this instance will NOT be initialized.
the I/O output data size is set to 0, this instance will NOT be initialized.
Note
Rockwell Automation PLCs have the first four bytes consumed by a device defined as status
information. This behavior is specific to devices from Rockwell Automation and is not defined in
the EtherNet/IP specification. However, since all known PLCs are implemented this way, the
Micro Motion EtherNet/IP Module adopts this behavior and strips off the corresponding four
bytes from the consumed data.
information. This behavior is specific to devices from Rockwell Automation and is not defined in
the EtherNet/IP specification. However, since all known PLCs are implemented this way, the
Micro Motion EtherNet/IP Module adopts this behavior and strips off the corresponding four
bytes from the consumed data.
B.2.4
Port Object, Class F4h
Supported services
Class services:
•
Get Attribute Single
•
Get Attribute All
Configuration
Output assembly attributes
Basic
Concentration measurement
#
Access
Name
Type
Value
Description
3
Set
Data
Array of BYTE
-
Data consumed by the Micro Motion
EtherNet/IP Module
EtherNet/IP Module