TANDBERG 4500 Series Manuel D’Utilisation

12

You need to tell conference participants how to join conferences. You can also tell 
them how to use the Far-End Camera Controls (FECC) to navigate menus in the auto 
attendant and choose conference layouts. There is a document: Getting Started: 
Accessing Conferences available in the documentation area of the web site, which you 
can print out and give to conference participants.

It is a good idea to regularly check for updates to the main MCU software image. 
This section describes how to upgrade the MCU using the web. Note that you can 
also upgrade the MCU using FTP; this can be more reliable if you are upgrading the 
device remotely. Upgrading your device via FTP is described in the release notes that 
are available alongside the software images in the support section of the web site.
To check for, and download, updates:
1

Log in to the MCU web interface and go to 

 > 

.

2

Make a note of the software version that is currently installed.

3

Go to the support section of the web site and check if a more recent release is 
available for the MCU. 

4

If a more recent release is available, download it and save it locally.

To upgrade the MCU:
1

Unzip the software release file that you downloaded. 

2

In the MCU web interface, go to 

 > 

. 

3

In  the 

 section, click 

 and locate the unzipped file. 

4

Click 

. The browser begins uploading the file to the 

MCU, and a new browser window opens to indicate the progress of the upload. 
When finished, the browser window refreshes and indicates that the software 
upgrade is complete.

5

Go  to 

 > 

 to shut down and restart the MCU. 

Note that shutting down the MCU will disconnect all participants.