ZyXEL Communications n/a Manuel D’Utilisation
Chapter 21 WAN Commands
DSL & IAD CLI Reference Guide
155
21.2.1 wan atm Examples
The following example:
• Enables VC hunting.
• Configures VC hunting to hunt remote node 1 with a VPI of 30 and a VCI of 33.
• Sets the ZyXEL Device to search all services.
• Displays the VC hunt parameters.
wan atm vchunt clear
Clears the virtual circuit configuration working
buffer.
buffer.
wan atm vchunt display
Displays the virtual circuit hunt pool (the group of
parameters the ZyXEL Device checks for an active
VC).
parameters the ZyXEL Device checks for an active
VC).
wan atm vchunt remove <node#> <vpi>
<vci>
Removes the entry with the specified profile
number, VPI and VCI from the hunt pool.
number, VPI and VCI from the hunt pool.
<node#>
: input the remote node index 1-8
<vpi>
: VPI value
<vci>
: VCI value
wan atm vchunt result
Displays the VC hunt result.
wan atm vchunt save
Saves the current setting in the virtual circuit hunt
pool working buffer to the permanent memory.
pool working buffer to the permanent memory.
Note: Changes to the configuration in the
working buffer are not saved or
used until you enter this command.
used until you enter this command.
wan atm vchunt send
Manually starts the VC auto-hunt.
wan atm vchunt timer <seconds>
Sets the length of time the ZyXEL Device waits
before checking the virtual circuit hunt result.
before checking the virtual circuit hunt result.
wan atm vchunt webRedirDis <1|0>
Enables or disables web redirection. Enter 1 to
disable web redirection, or enter 0 to disable it.
disable web redirection, or enter 0 to disable it.
Table 62 wan atm Commands (continued)
COMMAND
DESCRIPTION