ZyXEL Communications n/a User Manual

 Chapter 21 WAN Commands

DSL & IAD CLI Reference Guide

The following example:

• Enables VC hunting.

• Configures VC hunting to hunt remote node 1 with a VPI of 30 and a VCI of 33.

• Sets the ZyXEL Device to search all services.

• Displays the VC hunt parameters.

wan atm vchunt clear

Clears the virtual circuit configuration working 
buffer.

wan atm vchunt display 

Displays the virtual circuit hunt pool (the group of 
parameters the ZyXEL Device checks for an active 
VC). 

wan atm vchunt remove <node#> <vpi> 

<vci>

Removes the entry with the specified profile 
number, VPI and VCI from the hunt pool.

<node#>

: input the remote node index 1-8

<vpi>

: VPI value 

<vci>

: VCI value

wan atm vchunt result

Displays the VC hunt result.

wan atm vchunt save

Saves the current setting in the virtual circuit hunt 
pool working buffer to the permanent memory.

Note: Changes to the configuration in the 

working buffer are not saved or 
used until you enter this command.

wan atm vchunt send 

Manually starts the VC auto-hunt. 

wan atm vchunt timer <seconds>

Sets the length of time the ZyXEL Device waits 
before checking the virtual circuit hunt result.

wan atm vchunt webRedirDis <1|0>

Enables or disables web redirection. Enter 1 to 
disable web redirection, or enter 0 to disable it.

Table 62   wan atm Commands (continued)