Marantz SR7300OSE Manuel D’Utilisation

Change the input source for the amplifier to CD and play the 3rd track
on a CD in the CD player.

Press and hold the 

 and 

button until the 

is displayed on the LCD.
•

and 

is displayed blinking.

Press the 

 button. CD-M is displayed on the LCD.

Press 

, 

, and 

3 

buttons.

When you are finished programming the macro, press the 

button until the display returns to USE mode.

Press the 

 button for 3 seconds.

• The macro commands are transmitted to the components in

order, and the steps of the operations are displayed on the
LCD in order.

Turn the main amplifier ON 

→

 Change the amplifier’s input source to

DVD 

→

 Set the Surround mode to VIRTUAL 

→

 Set the DVD player to

PLAY

Press and hold the 

 and 

button until the 

is displayed on the LCD.
•

and 

is displayed blinking.

Press the 

 button .

• Here the 

 button is used as the macro button,

but any function button can in fact be used.

To set the various steps of the macro, press the following buttons
in order:

*

→

 

→

 

→

 

*

→

 

(VIRTUAL)

→

  

*

→

  

3 

.

When you are finished programming the macro, press the 

button until the display returns to USE mode.

Press the 

 button for 3 seconds.

The macro commands are transmitted in order, and the steps of
the operations are displayed on LCD in order.

• When executing this macro, function operations AMP* and

DVD* only switch the command set of the remote controller
and no signal is transmitted to the component.