Black Box ACXIO8-SM Manuel D’Utilisation
Page 103
724-746-5500 | blackbox.com
Chapter 5: Operation
2. Switching to the CPU Port 23 of the slave matrix:
<Left Shift>, <Left Shift>, <s>, <2>, <3>, <Enter>
NOTE: The selected master/slave mode is permanently activated until another
mode is manually activated. This means that if you select <s> for example,
all prospective commands will be sent to the slave, but not if the Command
Mode is left in the meantime.
all prospective commands will be sent to the slave, but not if the Command
Mode is left in the meantime.
5.1.4 Function Keys <F1>–<F12>
In Command Mode you can retrieve the Macros 1–12 with the function keys
<F1>–<F12> of the connected standard keyboard instead of the special macro
keyboard.
<F1>–<F12> of the connected standard keyboard instead of the special macro
keyboard.
The deposited command sequence for the appropriate function key is executed
and Command Mode is left immediately.
and Command Mode is left immediately.
By using <s> or <S> and <m> or <M> before you key in other commands, you
can select whether the command sequence should be executed for the master or
the slave.
can select whether the command sequence should be executed for the master or
the slave.
NOTE: The chosen control level remains selected only if the switch remains in
Command Mode.
5.2 KVM Switching
To switch using the ServSwitch DKM FX, use OSD or Java:
Figure 5-1. OSD and Java icons.