Black Box ACXIO8-SM Manuel D’Utilisation
Page 121
724-746-5500 | blackbox.com
Chapter 7: Troubleshooting
7.4 Power Supply Units Malfunction
Table 7-4. Power supply units malfunction.
Problem
Possible Cause
Solution
ServSwitch DKM FX
cannot be started
cannot be started
Power supply units not locked
correctly
correctly
Check the power supply unit’s lock and
plug-in
plug-in
No power supply is available
Check that cables for the power supply
are connected correctly
are connected correctly
Power supply units are not
switched on
switched on
Check the slide to switch on the power
supply units
supply units
7.5 Network Error
Table 7-5. Network error.
Problem
Possible Cause
Solution
Network settings are not resumed after
editing
editing
ServSwitch DKM FX restart is not
yet completed
yet completed
Restart the unit
7.6 ServSwitch DKM FX Failure
Table 7-6. ServSwitch DKM FX failure.
Problem
Possible Cause
Solution
Serial control is impossible
or restricted
or restricted
CPU and ServSwitch DKM FX
are running at a different baud
rate
are running at a different baud
rate
Adapt the baud rate in the
ServSwitch DKM FX and in the
CPU
ServSwitch DKM FX and in the
CPU
Serial control via the RJ-45
port is not possible
port is not possible
Wrong network cable
Use a cross-pinned network cable
Port definitions as USB 2.0
invalid
invalid
ServSwitch DKM FX restart not
yet completed
yet completed
Restart the ServSwitch DKM FX