Weber 2 Manuel D’Utilisation
2
Step 5
FOR MODELS THAT USE THE ENCLOSED
BRASS FITTING
BRASS FITTING
Apply pipe sealant to only the area indicated. Figure 5.
몇
WARNING: Use a pipe sealant compound on the
threads that is approved for natural or LP gas.
Screw the fitting into the manifold using the 5/8 inch wrench.
Figure 6(a).
Figure 6(a).
Only use pipe
sealant here
sealant here
NO pipe
sealant here
sealant here
Figure 5
Figure 6(a)
Black pipe plug
Brass cap
Side burner fitting
MODELS WITH A BLACK SQUARE PIPE PLUG:
Using an adjustable wrench, remove the pipe plug from
the manifold. Figure 3.
the manifold. Figure 3.
Step 4
SIDE BURNER GAS CONNECTIONS
MODELS WITH A BRASS CAP:
Using two adjustable wrenches, remove the brass cap
from the side burner fitting. Figure 2.
from the side burner fitting. Figure 2.
몇
CAUTION: When removing the cap “hold” the side
burner fitting to keep it from becoming loose. If the
side burner fitting should loosen, tighten before
attaching side burner hose.
side burner fitting should loosen, tighten before
attaching side burner hose.
Note: After you complete this step, skip Steps 5 and 6
and please go onto Step 7.
and please go onto Step 7.
Figure 2
Figure 3
MODELS WITH A BRASS SQUARE PLUG:
Using an adjustable wrench, remove the pipe plug from
the manifold. Figure 4.
the manifold. Figure 4.
Brass square plug
Figure 4
Figure 6(b)
Screw the fitting into the brass plug elbow. Figure 6(b).
OR