Weber 2 사용자 설명서

Step 5

FOR MODELS THAT USE THE ENCLOSED
BRASS FITTING

Apply pipe sealant to only the area indicated. Figure 5.

몇

WARNING: Use a pipe sealant compound on the

threads that is approved for natural or LP gas.

Screw the fitting into the manifold using the 5/8 inch wrench.
Figure 6(a).

Only use pipe
sealant here

NO pipe
sealant here

Figure 5

Figure 6(a)

Black pipe plug

Brass cap

Side burner fitting

MODELS WITH A BLACK SQUARE PIPE PLUG:

Using an adjustable wrench, remove the pipe plug from
the manifold. Figure 3.

Step 4

SIDE BURNER GAS CONNECTIONS

MODELS WITH A BRASS CAP:

Using two adjustable wrenches, remove the brass cap
from the side burner fitting. Figure 2.

몇

CAUTION: When removing the cap “hold” the side

burner fitting to keep it from becoming loose. If the
side burner fitting should loosen, tighten before
attaching side burner hose.

Note: After you complete this step, skip Steps 5 and 6
and please go onto Step 7.

Figure 2

Figure 3

MODELS WITH A BRASS SQUARE PLUG:

Using an adjustable wrench, remove the pipe plug from
the manifold. Figure 4.

Brass square plug

Figure 4

Figure 6(b)

Screw the fitting into the brass plug elbow. Figure 6(b).