SVAT Electronics CLEARVU11 Manuel D’Utilisation
SVAT ELECTRONICS
now you can see
CLEARVU11
7
BASIC SETUP
MOUNTING THE CAMERA
1. Screw the mounting bracket into the camera’s mounting hole,
turning it clockwise.
2. Mount the camera in the desired location no more than 60 feet from
the DVR unless you have purchased additional wiring. You may wall
mount or desk mount these cameras.
3. Adjust cameras to the desired viewing angles.
1. Plug the 4PIN DIN female connection
on the camera into the 4PIN DIN male
connection on the 60ft video/power wire.
connection on the 60ft video/power wire.
2. Plug the camera’s power supply into one of
the 4 ports of the power supply.
3. Plug the four port power supply into the
12 V adapter.
4. Plug the power supply into the 12 V
adapter.
5. Attach all of the BNC to RCA adapters
to the camera inputs and the monitor
outputs on the back of the LCD/DVR.
outputs on the back of the LCD/DVR.
6. Connect the male RCA plug from the 60
ft power wire to the BNC connectors on
the channel inputs (1-4) on the back of
the DVR.
the channel inputs (1-4) on the back of
the DVR.
7. Plug the other end into the female end
of the 3.5 mm wire from the camera.
Follow these instructions for the installation of each camera. The 60ft video/power wire has two connections: one for
video out, and one for power.
WIRING THE CAMERAS
1
2
6
7
3
4