Benq VA261 Manuel D’Utilisation

Section 1: Quick Start Guide

4

5. Activate the remote control

1. Locate the remote control and batteries from the packaging, and unwrap them.

Remote control usage tips

2. Turn the remote control end up to reveal its base, and open 

the lid of the battery compartment by using a small coin or 

similarly curved object to rotate the slot 90° anticlockwise. 

The lid is spring loaded and will popup and come loose 

from the remote control body.

3. Insert the batteries (supplied) ensuring that the positive and 

negative marked battery terminals match the (+) and (-) 

marks in the battery compartment.

4. Refit the lid of the battery compartment by inserting the 

hinge into the recess at one edge and levering the lid down 

into position with the thumb of the hand holding the 

remote control body.

5. Whilst holding the lid in place in this manner, use your 

other hand and a small coin or similarly shaped object to 

rotate the locking slot 90° clockwise locking the lid in place.

• Point and aim the top front of the Remote 

Control directly at the TV when pressing the 

buttons.

• The remote control must be held at an angle 

within 30 degrees of the TV's remote control 

sensor window to function correctly. The 

distance between the remote control and the 

sensors should not exceed 5 metres.

• Do not cover the sensor window on the front 

of the TV (below the power indicator lamp), 

or place objects in front of it which will block 

the direct line-of-sight between the Remote 

Control and the sensor window on the TV.