Panasonic ag-hpx300p Manuel D’Utilisation
11
Chapter
Men
uOper
ations
5
UsetheJOGdialbuttontochangethesetting
value.
value.
PUSH MENU TO RETURN
MID GAIN
HIGH GAIN
ATW
ATW TYPE
W.BAL.PRESET
USER MAIN
0dB
6dB
12dB
OFF
1
USER1
BACK LIGHT
3.2K
5.6K
LOW GAIN
SW MODE
6
Tochangeothersettings,repeatstepsand.
• When you finish, press the MENU button to return
to the function screen.
7
Tochangeotherfunctions,repeatstepsto.
• To exit the function screen and return to the normal
screen, press the MENU button again.
NOTE
Direct close function
When the MENU button is pressed and held down after making
a menu setting, the setting menu screen closes without first
returning to the previous setting menu.
a menu setting, the setting menu screen closes without first
returning to the previous setting menu.
To quickly change settings (MASTER PED and H PHASE
only)
only)
• Fast UP
Hold down the JOG dial button while turning it upwards
and maintain this position.
and maintain this position.
• Fast DOWN
Hold down the JOG dial button while turning it downwards
and maintain this position.
and maintain this position.
Initializing the menu settings
The menu settings contain both the user file settings and
the scene file settings. You can initialize them separately.
the scene file settings. You can initialize them separately.
To initialize scene files (i.e. all the
settings other than the scene file
settings)
settings other than the scene file
settings)
Select INITIAL in USER FILE of the OTHER FUNCTIONS
screen. The current menu settings of user file will return to
the factory settings.
screen. The current menu settings of user file will return to
the factory settings.
To initialize the scene file
From the 6 scene files, select the one you want to initialize
with the SCENE FILE dial. Then in the SCENE FILE screen,
LOAD/SAVE/INIT, select INITIAL.
The settings for only the selected scene file are returned to
the factory settings.
• This does not affect the other scene files.
with the SCENE FILE dial. Then in the SCENE FILE screen,
LOAD/SAVE/INIT, select INITIAL.
The settings for only the selected scene file are returned to
the factory settings.
• This does not affect the other scene files.
Initializing user files and scene files
simultaneously
simultaneously
You can return the user files and the six scene files to their
factory defaults by selecting YES in the menu option MENU
INIT in the OTHER FUNCTIONS screen.
factory defaults by selecting YES in the menu option MENU
INIT in the OTHER FUNCTIONS screen.